Description
-
Complete All-In-One Kit: Includes the Premier submersible borehole/well pump, smart MPPT controller, two high-efficiency 330W solar panels, cable connectors, and waterproofing accessories.
-
80m Maximum Head Lift: Designed to pull water from deep boreholes or push water up high elevations effortlessly.
-
Solar-Powered Efficiency: Powered by two 330W solar panels (660W total), providing reliable off-grid water pumping without electricity costs.
-
Smart Controller: Optimizes pump performance during low-light/cloudy conditions and protects against dry running and over-voltage.
-
Durable Construction: Stainless steel pump housing built for heavy-duty agricultural, livestock, and residential use.
-
Warranty: Guaranteed quality and long-term reliability (standard Premier manufacturer warranty applies).
Pumping Distance & Lift Capabilities
-
Vertical Lift (Max Head): Up to 80 meters (262 feet)
-
Explanation: The total vertical distance measured strictly from the water level inside the well/borehole straight up to the outlet point (e.g., top of a elevated tank).
-
-
Horizontal Distance: Up to 800 meters – 1,000+ meters (2,600+ feet)
-
Explanation: On flat ground, water experiences far less resistance. As a general rule of thumb in plumbing, 1 meter of vertical head converts to approximately 10 meters of horizontal pipe pumping distance (assuming standard 1″ to 1.25″ HDPE/PPR piping and minimal pipe friction loss).
-
-
Sloped Distance: ~100 to 400+ meters (depending on gradient)
-
Explanation: On an incline, total pump lift is calculated by adding the vertical height (elevation gain) to the frictional resistance of the pipe length. For example, pumping up a gentle 10% slope across 400 meters equals a 40-meter vertical gain plus minor pipe friction, well within the pump’s 80m capacity.
-
There are no reviews yet.